Manhole Rehabilitation > Manhole Rehab Products >Linings / Coatings Products for Manhole Rehabilitation
PARSON CA LINER 100
High strength, fiber-reinforced, microsilica enhanced 100% Calcium Aluminate Cement
with select aggregates
|
 |
ADVANTAGES |
 |
- Cost–effective alternative to replacement
- Stops infiltration and exfiltration
- Restores structural integrity
- Provides moderate to high corrosion protection
- High Strengths and Low Permeability
- Excellent Bond to damp surfaces
- Apply up to 2” in a single coat
- Spincast, Spray Gun or trowel application
|
PHYSICAL PROPERTIES |
|
Compressive Strength
ASTM C-109 |
1 day > 5,500 psi
28 days > 9,000 psi |
Bond
ASTM C-882 |
> 2,000 psi |
Flexural Strength
ASTM C-293 |
28 days > 1,600 psi |
Shrinkage
ASTM C-596 |
0.0% at 95% RH |
Tensile Strength
ASTM C-496 |
28 days > 800 psi |
Freeze/Thaw
ASTM C-666 |
300 cycles, No damage |
| Applied Density |
130 pcf |
Permeability
AASHTO T-277 |
< 300 coulombs (very low) |
Sulfide Resistance
ASTM C-267 |
No weight loss after
90 days in 20,000 ppm
aqueous sulfuric acid solution |
|
|
|
APPLICATION |
|
Thoroughly clean structure using minimum 3500 psi waterblast. Stop all active leaks.
Mix approximately
¾ gallon of clean, potable water per 50 lb. bag until a uniform consistency has been obtained.
Apply mixed product by spray or trowel to a minimum thickness of 1/2". Trowel or brush to a smooth finish within one hour.
|
COVERAGE |
|
Approximately 1 vertical foot per 50 lb. bag at 1/2 inch thick.
|
DOWNLOADS |
|
Parson CA Liner 100 Full Data Sheet
Manhole Rehabilitation & Grouting Specifications
|
 |
|
