Parson Environmental Products - Manhole rehab Professionals Since 1985
   
 
Manhole Rehabilitation > Manhole Rehab Products > Patching / Invert Channel Repair Products for Manhole Rehabilitation

PARSONPOXY FP
Flexible epoxy for manhole chimney and joint rehabilitation


ADVANTAGES
  • Dries durable, flexible and waterproof
  • Non-toxic – 100% solids
  • Chemically resistant
  • No primer required
  • Pre measured kit – no guesswork
  • Easy application
  • Elongation of 600%
PHYSICAL PROPERTIES

Elongation  ASTM D-412 600%    
Tensile Strength  ASTM D-412 1600 psi
Impact Flexibility  ASTM D-256 120 inch pounds 
Hardness, Shore A  ASTM D-2240 80 
Adhesion ASTM D-4541 350 psi (substrate failure)
Slant Shear Strength  ASTM D-638 2000 psi


APPLICATION
Surfaces must be cleaned of all rust, scale, marine growth, debris, grease and loose material. Clean concrete with a minimum 3500 psi waterblast and metal with mechanical wirebrush. Surface must be dry prior to application of material. Sandblasting is not required. Empty contents of Part B into Part A container and mix until a uniform color is achieved. Pot Life is approximately 40 minutes at 77°F.


PACKAGING
PARSONPOXY FP is available in premeasured kits containing 1 gallon Part A and 1 quart Part B.


COVERAGE
One Full Kit of mixed material will cover approximately 24 vertical inches in a 27" diameter manhole at 115 mils thick.


DOWNLOADS
pdf-iconParsonpoxy FP Full Data Sheet
pdf-iconManhole Rehabilitation & Grouting Specifications

 
VIDEO


Manhole Rehabilitation - The Parson Process


IMAGES

Parsonpoxy FP

 
INTERACTIVE CHARTS

Inflow Cost Analysis


Infiltration Cost Analysis
 
 
© 2012 - 2013 Parson Environmental Products, Inc. Privacy Policy Terms of Use   800.356.9023
HOME ABOUT CONTACT SPECIFICATIONS MANHOLE REHAB VIDEOS