Manhole Rehabilitation > Manhole Rehab Products > Manhole Linings / Coatings for Manhole Rehabilitation
PARSONPOXY SEL-80
A corrosion resistant epoxy coating to protect concrete structures against H2S attack.
|
 |
ADVANTAGES |
 |
- Contains NO Flammable Solvents -100% solids
- Apply to horizontal or vertical surfaces
- Effective on interior and exterior surfaces
- Apply to new and existing concrete and metal surfaces
- Excellent Chemical resistance
|
PHYSICAL PROPERTIES |
|
| DESCRIPTION |
METHOD |
RESULTS |
| Set Time @ 70ºF |
|
6-8 hours |
| Cure Time @ 70ºF |
|
18-20 hours |
| Compressive Strength |
ASTM D-695 |
19,500 psi |
| Tensile Strength |
ASTM D-638 |
8,000 psi |
| Flexural Strength |
ASTM D-790 |
13,000 psi |
| Elongation |
ASTM D-638 |
4.3% min. |
| Flexural Modulus (initial) |
ASTM D-790 |
750,000 psi |
| Flexural Modulus (long-term) |
ASTM D-790 |
375,000 psi |
| Modulus of Elasticity |
ASTM D-638 |
554,000 psi |
| Impact, IZOD |
ASTM D-256 |
0.315 ft lb |
| Adhesion |
ASTM D-4541, Concrete |
Substrate failure |
| |
Steel (SSPC-10) |
>1500 psi |
| Hardness, Shore D |
ASTM D-2240 |
88 |
| Water Vapor, Transmission |
ASTM D1653, Method B |
3.6 gms/sq.m per 24 hrs |
| Taber Abrasion, CS17 Wheel |
ASTM D-4060, 1000 g load / 1000 cycles |
<110 mg loss |
| Temperature Resistance |
Steel, unprimed and concrete |
220ºF |
|
APPLICATION |
|
PARSONPOXY SEL-80 may be applied with a stiff nylon bristle mason’s brush or single-component spray equipment approved by the coating manufacturer. Apply to a thickness up to 100 mils per coat. If additional coats are required to achieve desired thickness, apply when tack-free and up to 12 hours. If maximum recoat time of 12 hours has been exceeded, the coating surface must be sandblasted or grinded to create a profile. Pressure wash to remove residue and dry with towels or forced air. Parts A and B and spray equipment must be at 80 - 85ºF prior to and throughout the application process. Application temperature range is 40°F and 100°F.
|
COVERAGE |
|
Approximately 20 Sq. Ft./Gal. @ 80 mils and 16 Sq. Ft./Gal @ 100 mils.
|
DOWNLOADS |
|
Parsonpoxy SEL-80 Full Data Sheet
Parsonpoxy SEL-80 Chemical Resistance Chart
Manhole Rehabilitation & Grouting Specifications
|
 |
|
