Manhole Rehabilitation > Manhole Rehab Products > Leak Stopping > Urethane Grouts
PARSON SEAL-TITE
Two component, fast reacting Polyurethane Grout |
 |
ADVANTAGES |
 |
- Cures to a dense, rigid mass in approximately 30 seconds
- Stops leaks up to 50gpm
- Will not shrink
- Non Hazardous – 100% Solids
- Environmentally Friendly
- Excellent Bond Strength
- Will expand to 10 – 12 times liquid volume
|
PHYSICAL PROPERTIES |
|
| Viscosity |
A-200 cps @ 77°F
B-800 cps @ 77°F |
Brookfield Method |
Density (Free Rise)
(Confined) |
4 lbs/cu. ft.
20lbs/cu. ft. |
ASTM D-1622 |
| Shrinkage |
0% after 90 days |
|
| Compressive Strength |
100 psi |
ASTM D-1621 |
| Tensile Strength |
105 psi |
ASTM D-638 |
| Shear Strength |
75 psi |
ASTM C-273 |
| Water Absorption |
< 1% by volume |
ASTM D-2172 |
| Elongation |
5% |
ASTM D-1623 |
| Reaction Time |
3-5 seconds |
|
| Expansion Time |
30 seconds |
|
|
APPLICATION |
|
Drill one 5/8" hole through the structure,and above the leak on a 45 degree angle. Install the static mixer and place the dual cartridge into the manual dual component caulk gun. Place the static mixer into the drilled hole and squeeze the trigger quickly and repeatedly until both cartridges are completely empty, which should take less than 15 seconds. Immediately unscrew the black screw cap from the dual cartridge.
|
PRECAUTIONS |
|
PARSON SEAL-TITE reacts very quickly. It is important to remove ALL material from both tubes within 15 seconds. Store in a dry environment at 70°F. See SDS for specific instructions.
|
PACKAGING |
|
PARSON SEAL-TITE is available in cases containing 6 individually packaged 22 oz. Dual Cartridges + 6 Static Mixers.
|
DOWNLOADS |
|
Parson Seal-Tite Full Data Sheet
Manhole Rehabilitation & Grouting Specifications
|
 |
|
